HP DESKJET INK ADVANTAGE 3525 e-ALL-IN-ONE Serie Mode D'emploi page 4

Networked printer use
Learn about wireless printing
For the most complete, up-to-date information about wireless printing, go to the HP Wireless Printing Center at
www.hp.com/go/wirelessprinting.
Change from a USB connection to a wireless connection
If you first install the printer with a USB connection, you can later change it to a wireless network connection.
To change the connection, perform the following steps:
Windows
1. From the computer's start menu, select All
Programs or Programs, and then select HP.
2. Select HP Deskjet 3520 series.
3. Select Printer Setup & Software.
4. Select Convert a USB connected printer to
wireless. Follow the onscreen instructions.
Share your printer with multiple computers
You can share the printer with other computers which are also connected to your home network. If the
printer is already connected to your home network and installed on a network computer, for each additional
computer you only need to install the HP printer software. During the software installation, select the Wireless
(Network/Ethernet) connection when prompted, and then follow the instructions on the screen.
Connect wirelessly to the printer without a router
HP Wireless Direct allows you to print directly to your printer wirelessly, without a wireless router, from your
Wi-Fi enabled devices (for example: computers or smartphones). To use Wireless Direct, you need to:
1. Turn on Wireless Direct from the control panel, and get the Wireless Direct name and password if you
have Wireless Direct security on:
a. From your printer's home screen, press the Wireless button and then select Settings.
b. If the display shows that Wireless Direct is Off, select Wireless Direct and then select On (No Security)
or On (With Security).
Note: If you turn on security, only users with the password will be able to connect wirelessly to the
printer. If you turn off security, anyone with a Wi-Fi device within Wi-Fi range of the printer will be able
to connect to the printer.
c. Select Display Name to display the Wireless Direct name.
d. Select Display Password to display the Wireless Direct password if you have the Wireless Direct security
on.
2. From your wireless computer or mobile device, turn wireless on, search for and connect to the Wireless
Direct name, for example: HP-Print-XX-Deskjet 3520 series. If you have Wireless Direct security on, enter the
Wireless Direct password when prompted. Then print as you normally do from your computer or mobile
device.
Note:
• Wireless Direct connection provides no Internet access.
• To use Wireless Direct from a computer, the printer software must be installed on the computer.
• Wireless Direct connection is available even if the printer has a wireless connection to a home network.
Mac
Use HP Setup Assistant in Applications/Hewlett-
Packard/Device Utilities to change the software
connection to wireless for this printer.
4