VINCENT SA-T8 Manuel D'utilisation page 26

6. INPUT: Terminal for stereo audio signals
of the source equipment
Here you find six stereo input sockets for source
equipment (4x RCA, 2x XLR) with analogue stereo
(line level) audio output.
7. REC OUTPUT: Output connectors assigned
to a recording device
If desired, you can connect a recording device
like a CD recorder or a tape recorder to this out-
put. The stereo signal of this output is identical to
the output signal of the selected audio source at
one of the preamplifier INPUTs. As long as the
preamplifier is muted (5)(11), the output "REC
OUTPUT" (7) does not give the music signal.
8. OUTPUT: preamplifier outputs
With these three pairs of connectors you can con-
nect the preamplified stereo audio signal of the
currently selected source to the power amplifier
channels. The volume and mute settings have
effect on the signal at this output.
Vincent
26
REAR VIEW
6 7 8
9. POWER CONTROL: ON/OFF control
These jack connectors (3.5 mm) provide the
on/off signal for the standby control (12V
Trigger).
10. Power Connector with Fuse holder
To establish the power supply, connect the plugs
of the power cable to the device and to a suitab-
le wall outlet. The small plastic housing holds the
fuse. Refer to the security precautions.
9 10