Publicité
Les langues disponibles
Les langues disponibles
Symbols and their meaning
The table shows the recommended
speed setting depending on the material
to be worked: Aluminium, plastic, wood.
3
When sawing bevel angles, the adjustable
fences must be pulled outwards or re-
moved completely.
3 601 M19 2..
Observe the dimensions of the saw
blade. The hole diameter must match the
tool spindle without play. If it is neces-
sary to use reducers, ensure that the di-
mensions of the reducer are suitable for
the base blade thickness and the saw
3 601 M19 2B.
blade hole diameter, as well as the tool
spindle diameter. Wherever possible, use
25,4
the reducers provided with the saw
blade.
The saw blade diameter must match the
information specified on the symbol.
Shows the rotational direction of the SDS
bolt for tightening the saw blade (anti-
clockwise) and for loosening the saw
blade (clockwise).
Clamping lever closed:
The adjusted bevel angle of the tool arm
is held in place.
Clamping lever open:
Bevel angles can be adjusted.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended as a stationary machine for mak-
ing straight cuts in wood with and against the grain. It is pos-
sible to cut mitre angles of -52° to +60° and bevel angles of
47° (to the left) to 47° (to the right).
The power tool is designed with sufficient capacity for saw-
ing hardwood and softwood as well as chipboard and fibre-
board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
Bosch Power Tools
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Slide device
(2)
Chip ejector
(3)
Transport handle
(4)
Depth stop adjusting screw
(5)
Laser protection cap
(6)
Guide roller
(7)
Lock-off function for on/off switch
(8)
On/off switch
(9)
Handle
(10)
Protective guard
(11)
Retracting blade guard
(12)
Saw blade
(13)
Saw table extension
(14)
Fence
(15)
Adjustable fence
(16)
Saw table
(17)
Clamping lever of the saw table extension
(18)
Scale for mitre angles
(19)
Insert plate
(20)
Locking clamp
(21)
Locking knob for various mitre angles
(22)
Mitre pre-setting lever
(23)
Tilt protector
(24)
Angle indicator for mitre angles
(25)
Detents for standard mitre angles
(26)
Mounting holes
(27)
Recessed handles
(28)
Screw clamp
(29)
Standard bevel angle stops 45°, 22.5° and 33.9°
(30)
Scale for bevel angle
(31)
Angle indicator for right-hand bevel angle range
(32)
Depth stop
(33)
Locking screw for slide device
(34)
Hex key (5 mm)
(35)
Holes for screw clamp
a)
(36)
Length stop
(37)
Transport safety lock
(38)
Speed regulator
(39)
Laser warning label
(40)
On/off switch for laser (cutting line indication)
(41)
Clamping lever for all bevel angles
(42)
Angle indicator for left-hand bevel angle range
(43)
Chip deflector
(44)
Stop for standard 0° bevel angle
English | 29
1 609 92A 7NA | (26.04.2022)
Publicité
