Publicité
Les langues disponibles
Les langues disponibles
24
Upper spray arm
9
Visual signal
• When the washing programme starts, a
red visual signal shows on the floor below
the appliance door. This red signal stays
on until the washing programme is com-
pleted.
Control panel
The controls are on the top on the con-
trol panel. To operate with the controls,
keep the appliance door ajar.
On/off button
1
Display
2
Delay button
3
Programme button (down)
4
Programme button (up)
5
Salt indicator. It comes on when it is necessary to fill the salt container.
After you fill the container, the salt indicator can stay on for some hours. This
does not have an unwanted effect on the operation of the appliance.
Rinse aid indicator. It comes on when it is necessary to fill the rinse aid dispens-
er.
End indicator. It comes on when the washing programme is completed.
1) When the salt container and/or the rinse aid dispenser are empty, the related indicators do not come on while a
washing programme operates.
On/off button
Press this button to activate or deactivate
the appliance.
After ten minutes from the end of the wash-
ing programme, the AUTO OFF function au-
tomatically deactivates the appliance. This
helps to decrease energy consumption.
Display
The display shows:
• The electronic adjustment of the level of
the water softener
• The activation and deactivation of the
rinse aid dispenser (only with the multitab
function on)
• The number of the washing programme
1
1)
• When the washing programme is com-
pleted , a green visual signal shows on
the floor below the appliance door.
• When the appliance has a malfunction, a
red visual signal flashes on the floor be-
low the appliance door.
2
3
4
5
6
SAVE ENERGY button
6
Multitab button
7
RESET button
8
Indicators
9
Indicators
• The remaining time to the end of the
washing programme
• The end of a washing programme (the
display shows a zero)
• The time of the delay start
• The alarm codes
• The activation and deactivation of the
acoustic signals.
Delay start button
Press this button again and again to delay
the start of the washing programme from 1
to 24 hours.
Programme buttons
Press one of these buttons again and again
to set a washing programme. Each time
you press a button, the display shows a
8
9
7
1)
Publicité
