Setting The Clock; Setting The Oven Timer; Setting A Cooking Program; Cooking Power - Danby DMW1110BLDB Guide D'utilisation Et Soins De Propriètaire

Operating Instructions
SIGNALS DURING OVEN SETTINGS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry. Check and try again.
SETTING THE
CLOCK
SETTING THE OVEN
TIMER
SETTING A COOKING
PROGRAM

Cooking Power

Number Pad
1. Touch CLOCK pad.
2. Use the number pads to enter the correct time.
3. Touch CLOCK pad again.
NOTE:
• This is a 12 hour clock. When the oven is first plugged in or when power re-
sumes after a power interruption, the display will show ENTER CLOCK TIME. If
you prefer not to have the clock displayed, touch RESET.
• You can check the clock time during cooking by touching the CLOCK pad.
1. Touch TIMER.
2. Enter the amount of time by touching the number pads (the maximum time is
99 minutes 99 seconds).
3. Touch START/STOP.
NOTE:
• Time countdown can be seen in display for 5 seconds before clock or cooking
time is returned to display.
• Touch TIMER and then touch RESET to cancel TIMER during timing process.
A. One-stage Cooking
1. Use the number pads to set a cooking time. You can set a cooking time from
one second to 99 minutes and 99 seconds.
2. If you want to set a power level other than 100% power, touch POWER LEV-
EL, then use the number pads to enter the power level. You can set the power
level from 1 to 9.
Use single digits to set a cooking power level:
100% 90%
1,0 9
3. Touch START/STOP to start cooking.
80% 70% 60%
8 7 6
11
50% 40% 30%
5 4 3
20% 10%
2 1