First Time Use; Microwave Cooking; Setting The Clock; Timer Function - Danby DMW11B1BBSDB Manuel Du Propriétaire

OPERATING INSTRUCTIONS

FIRST TIME USE

When the appliance is plugged in for the fi rst time,
the display will show "00:00". Use the number pad
to enter the current time and then press the clock
button to confi rm
When setting the cook timer, the appliance will
return to standby mode if there is no input within 25
seconds.
During operation:
• Press the Start/+30SEC button to begin
operation.
• Press the Stop/Clear button to cancel the
cooking program.
• The appliance will beep fi ve times at the end of
a cooking program.

SETTING THE CLOCK

The clock can be only be set as a 12 hour clock.
To set the current time:
1. Press the Clock button.
2. Use the number pad to enter the current time.
3. Press the Clock button to confi rm.
During operation, press the Clock button to see the
current time.

TIMER FUNCTION

To set the timer function:
1. Press the Kitchen Timer button.
2. Use the number pad to enter the desired time
to run the microwave. The maximum time is 99
minutes and 99 seconds.
3. Press the Start/+30SEC button to begin
operation.
Note: Programs cannot be set while the timer is
running.

MICROWAVE COOKING

1. Press the Time Cook button. The display will
show "00:00".
2. Use the number pad to enter the desired cooking
time. The maximum time is 99 minutes and 99
seconds.
3. Press the Power button to choose a power level.
The default power level is 100%. The display will
show "PL10". Use the number pad to enter the
desired power level if 100% is not required.
4. Press the Start/+30SEC button to begin
operation.
Note: If "PL0" is selected, the appliance fan will run
with no cooking function. This power level can be
used to remove odors from the oven.
Number Pad
0
1
2
3
4
5
6
7
8
9
10
8
Cooking Power Display
0% PL0
10% PL1
20% PL2
30% PL3
40% PL4
50% PL5
60% PL6
70% PL7
80% PL8
90% PL9
100% PL10