First Time Use; Microwave Cooking; Setting The Clock - Danby DOM16A2SSDB Manuel Du Propriétaire

OPERATING INSTRUCTIONS

FIRST TIME USE

When the appliance is plugged in
for the fi rst time, the display will
show "12:00". Use the number
pad to enter the current time and
then press the clock button to
confi rm
When setting the cook timer, the
appliance will return to standby
mode if there is no input within 1
minute.
During operation:
• Press the Start/+30SEC button
to begin operation.
• Press the Stop button to cancel
the cooking program.
• The appliance will beep four
times at the end of a cooking
program.

SETTING THE CLOCK

The clock can be set as a 12 hour
or a 24 hour clock. Press the Clock
button once to choose a 12 hour
clock. Press the Clock button twice
to choose a 24 hour clock.
To set the current time:
1. Press the Clock button once or
twice.
2. Use the number pad to enter
the current time.
3. Press the Start/+30SEC button
to confi rm.
During operation, press the Clock
button to see the current time.

MICROWAVE COOKING

1. Press the Time Cook button. The
display will show "00:00".
2. Use the number pad to enter
the desired cooking time. The
maximum time is 99 minutes
and 99 seconds.
3. Press the Power level button
to choose a power level. The
default power level is 100%.
The display will show "PL10".
Use the number pad to enter
the desired power level if 100%
is not required.
4. Press the Start/+30SEC button
to begin operation.
Note: If "PL0" is selected, the
appliance fan will run with no
cooking function. This power level
can be used to remove odors from
the oven.
Number Cooking
Pad Power
0 0%
1 10%
2 20%
3 30%
4 40%
5 50%
6 60%
7 70%
8 80%
9 90%
10 100%
7
Display
PL-0
PL-1
PL-2
PL-3
PL-4
PL-5
PL-6
PL-7
PL-8
PL-9
PL10