2-Set Volume Measurement; Heart Rate Measurement（Only Possible In "B/M" And "M" Mode - MS Multiscan Mode D'emploi

Picture 5.6. Illustration of volume measuring（3 Axis Method）

5.8.2. 2-set volume measurement

Measure two sets of circumference and area by Ellipse Method and the result is obtained by
calculating.
Procedures：（see picture 5.7 (Kidney) as example）
1. Catch the cross and longitudinal sections of the kidney and freeze.
2. Measure the circumference and area of cross and longitudinal sections.
3. The system will automatically complete the measuring, with the value of volume in
"Vm1"on the right side, as follow：
Picture 5.7. Illustration of Volume Measuring
5.9 Heart rate measurement（Only possible in "B/M" and "M" Mode
1. In B/M mode, freeze a desired image.
2. Measure the distance between the wave crests of two periods by means of the
distance measuring method.
3 sets of values will be displayed in the lower right corner. The marks are
respectively：Time T（unit：ms）. Heart Rate HR (unit： /m. Ejection Fraction EF
unit：mm/s）
48
（Ellipse Method）
B/M Mode
Picture 5.7. Illustration of Heart Rate Measuring
Single M Mode