Adjust Image Parameters; Frequency Setting; Gain Setting; Modify Brightness And Contrast - MS Multiscan Mode D'emploi

5.1.1 Adjust Image Parameters

The parameters include frequency of the probe, gain, brightness and contrast. Press 5
or 4 in real-time state, one of them is lightened. Use▲3 and ▼6 to set the parameters
and they are displayed in the upper right-hand corner.

5.1.2 Frequency Setting

Press 5 or 4 in real-time state to lighten frequency in the upper right-hand corner
and use ▲3 and ▼6 to adjust, with the range of 2.5MHz. 3.5MHz. 5.0MHz.

5.1.3 Gain Setting

Press 5 or 4 in real-time state to lighten gain in the upper right-hand corner and use
▲3 and ▼6 to adjust, in a range between 0 and 60.

5.1.4 Modify Brightness and Contrast

Press 5 or 4 to lighten "
contrast.

5.2 Settings note key

In freeze state，press NOTE，and the menu as shown in fig. 5.2.1. You can complete these
functions:
● Press M/0 ， select"0.NAME"to input a name，as follow：
+
0-A 1-B 2-C 7-D 8-E 9-F
There are 26 letter keys and 1 space key available, with ▲3. and ▼6 you can turn the page
up and down the select the necessary letter. Characters can be selected by pressing the
correspondant number key, maximum amout of characters that can be inserted is 15 .
Press CLS to clear the wrong character. Press NOTE to confirm and exit after the text is
40
. "，and use ▲3 and ▼6 to modify the brightness and
V1.20 Software Version Number
PLEASE ENTER NAME:
V1.20
0.NAME
1.AGE
2.SEX
3.COMMENT
4.TIME
5.HOSP
6.LANGUAGE
7.ERASE
8.DEFAULT SET
9.BEEP-ON
Figure 5.2.1：