Optional Mouse; Operating Instructions; Power On - MS Multiscan Mode D'emploi

Picture 4. 3.Four kinds of mode display
O.B. Obstetrics Table
Press it in freeze mode of"B"or"BB"to display the obstetrics menu. Press the number keys
and further details are available in the following instructions. To exit, please press CLS .
DIST Measure Reference
Along with +/2. M/0 and direction keys, the measure of distance, circumference, area
and histogram can be done. Further details are available in the following chapter.
NOTE
Press it, the note menu is displayed. Then press the number keys to enter the sub-menu.
Refer to the following chapter for further details. Press CLS to exit.
CLS Clean Screen
Press it to clean marks, notes and results. In menu status, press it to quit the menu.
RESET
Press it when the device crashes by accidents or operation mistakes, then the device can
return to normal.

4.4 Optional Mouse

As a supplement to the keyboard, a mouse can make the measure quicker and more
convenient. For this purpose always use a three button mouse.
The left, middle and right buttons of a three button mouse, all have their specific
functions.
Left Button:
● The cursor is displayed when you press it and enter distance measure.
Middle Button:
● Press it in real-time or freeze mode, the function is the same as CLS.
Right Button:
● It can identify the start and end place of the cursor in the distance measure mode and
shift between the two.
● It can identify the start position of the cursor in circumference and area measurement
when using the free-hand method.
● The function is the same as DIST in circumference and area measure by ellipse method.

5. Operating Instructions

5.1 Power On

Turn the MS Multiscan on by pressing the power switch on the right side of the
display unit and the "power" indicator will light up. Pressing any key (except
RESET ) will enter scanning mode, after the start-up logo has appeared. Adjust
Brightness, contrast and gain controls on the side of the mainframe to achieve
the best visual display. Picture 5-1. Start-up Logo
Adjust brightness, contrast and gain controls on the side of the mainframe to achieve
the best visual display.
39