Publicité
Les langues disponibles
Les langues disponibles
NOTE:
• Some items in the list may be included in the tool pack-
age as standard accessories. They may differ from
country to country.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model DPJ140
Sound pressure level (L
pA
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model DPJ180
Sound pressure level (L
pA
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: cutting grooves in MDF
Vibration emission (a
): 2.5 m/s
h
2
Uncertainty (K): 1.5 m/s
• The declared vibration emission value has been mea-
sured in accordance with the standard test method and
may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the oper-
ator that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
10
For European countries only
EC Declaration of Conformity
We
ENG905-1
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Plate Joiner
Model No./ Type: DPJ140, DPJ180
are of series production and
): 73 dB (A)
Conforms to the following European Directives:
And are manufactured in accordance with the following
standards or standardised documents:
): 74 dB (A)
The technical documentation is kept by:
ENG900-1
2
or less
ENG901-1
Makita
Corporation
as
2006/42/EC
EN60745
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
11.7.2011
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
ENH101-16
the
responsible
Publicité
