Télécharger Imprimer la page

ETNA SMV420WIT/E01 Mode D'emploi page 37

Publicité

Les langues disponibles

Les langues disponibles

OPERATION
Attention!
If you do not press the stop key or open the door, you will hear the beep every three
minutes.
Attention!
If you take out the food before the preset time, you have to press the stop button once to
clear the preset procedure.
The time and the clock symbol appear in the display.
Power setting
In the table you will see the microwave power settings you can use and for which these power
settings are suitable.
Display
100P (H)
80P (M.H)
60P (M)
40P (M.L)
20P (L)
Tip
During cooking you can increase or decrease the time by turning the adjust knob.
Power
100% (High) / 800 Watt
80% (Medium High) / 640 Watt Normal cooking
60% (Medium) / 480 Watt
40% (Medium Low) / 320 Watt Defrosting
20% (Low) / 160 Watt
1. Press the power button (several times) to set the power.
The set power appears in the display.
The symbols belonging to the setting that has been made
appear in the display.
2. Turn the adjust knob to set the desired time (max. 60 minutes).
The set time appears in the display.
3. Press the start button.
The microwave starts; in the display the time is counting down.
4. If the preset time has passed, you will hear three beeps.
'End' appears in the display.
5. Press the stop button or open the door.
Use
Quick cooking
Slow cooking/steaming
Keeping warm
EN 13

Publicité

loading

Ce manuel est également adapté pour:

Smv420Smv420wit