Télécharger Imprimer la page

ETNA SMV420WIT/E01 Mode D'emploi page 35

Publicité

Les langues disponibles

Les langues disponibles

OPERATION
Attention!
Attention!
Heating liquids in the microwave can result in delayed boiling. This means that the
liquid may start to boil furiously after it is removed from the microwave, with the risk of
scalding. You can offset the delayed boiling effect by placing a plastic or glass spoon in
the liquid prior to heating it in the microwave.
Attention!
Take care with baby food:
Shake or stir the content of babies' bottles or pots of baby food after heating.
Check the temperature of the food carefully prior to consumption to prevent scalding
injuries.
Attention!
Cutlery and tableware may become hot after using the microwave.
Clock setting
1. Connect the microwave to the power mains.
All symbols flash three times in the display. Then a flashing ':'
appears and you will hear a beep.
2. Press the clock button.
A clock symbol and '0:00' appear in the display, '0' flashes.
3. Turn the adjust knob to set the hours.
4. Press the clock button again.
'00' flashes in the display.
5. Turn the adjust knob to set the minutes.
6. Press the clock button again or wait for 5 seconds; the time has
been set.
The set time is shown in the display.
EN 11

Publicité

loading

Ce manuel est également adapté pour:

Smv420Smv420wit