Télécharger Imprimer la page

Philips HD6156 Mode D'emploi page 8

Masquer les pouces Voir aussi pour HD6156:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
EnglisH
8
using the appliance
Frying
Hot steam escapes from the filter in the lid during frying.
1
Take the entire cord from the cord storage compartment and put the plug in the wall
socket (Fig. 6).

Set the temperature control to the required temperature.
The temperature light goes on.
,
For the required temperature, see the package of the food to be fried or the food table at the end
of this booklet.
Note: You can leave the basket in the fryer while the fryer heats up.

Wait until the temperature light goes out (this takes 10 to 15 minutes).

Fold out the handle of the basket. (Fig. 7)
5 Press the release button to open the lid. The lid opens automatically (Fig. 2).

Remove the basket from the fryer and put the food to be fried in the basket.
Do not fry very large quantities at one time. Consult the food table at the end of this booklet
(the recommended quantity is indicated by -).
Note: Dry ingredients thoroughly before you fry them.
Note: Remove all excess ice from frozen ingredients before you fry them.
7
Carefully put the basket in the fryer (Fig. 8).
Make sure the basket has been inserted properly.
8
Close the lid.
9
HD6157 only: Set the required frying time (see section 'Timer' in this chapter).
You can also use the fryer without setting the timer.
10
Press the release button on the handle of the basket (1) and carefully fold the handle against
the fryer (2) (Fig. 9).
During frying, the temperature light comes on and goes out from time to time. This indicates that
the heating element is switched on and off to maintain the correct temperature.
timer (HD6157 only)
The timer indicates the end of the frying time, but does NOT switch off the fryer.
setting the timer
1
Press the timer button to set the frying time in minutes. (Fig. 10)
The set time becomes visible on the display.
,

Keep the button pressed to set the minutes forward quickly. Release the button once the
required frying time has been reached.
The maximum time that can be set is 99 minutes.
A few seconds after you have set the frying time, the timer starts to count down.
,
While the timer counts down, the remaining frying time flashes on the display. The last
,
minute is displayed in seconds.
Note: You can erase the timer setting by pressing the timer button for 2 seconds (at the moment the time
flashes) until '00' appears.
All manuals and user guides at all-guides.com

Publicité

loading

Ce manuel est également adapté pour:

Hd6157Hd6157/52