Publicité
Les langues disponibles
Les langues disponibles
04
• To minimize the possibility of burns, always be certain that the controls for all
surface elements are at the off position and the entire glass surface is cool
before attempting to clean the cooktop.
• Do not operate the glass surface elements if the glass is broken. Spillovers or
cleaning solution may penetrate a broken cooktop and create a risk of electrical
shock. Contact a qualified technician immediately should your glass cooktop
become broken.
• Clean the cooktop with caution. If a wet sponge or cloth is used to wipe spills on
a hot surface element, be careful to avoid steam burns. Some cleansers can
produce noxious fumes if applied to a hot surface.
• NOTE: We recommend that you avoid wiping any surface element areas until
they have cooled and the indicator light has gone off. Sugar spills are the
exception to this. Please see the Paqe 9 Cleaning the Glass Cooktop section.
• To avoid possible damage to the cooking surface, do not apply the cleaning
cream to the glass surface when it is hot.
• After cleaning, use a dry cloth or paper towel to remove all the cleaning cream
residue.
• Read and follow all instructions and warnings on the cleaning cream labels.
• Use care when touching the cooktop. The glass surface of the cooktop will retain
heat after the controls have been turned OFF.
• Do not stand on the glass cooktop.
• Large scratches or impacts to glass cooktops can lead to broken or shattered
glass.
Features of your cooktop.
Rated Voltage: AC 240V 60Hz or AC 208V 60Hz
Power range: AC 208V to 240V, 60Hz
1 (844) 538-7890
support@gaslandchef.com
Right Surface Element 1200W
Left Surface Element 2500W
Hot Surface Indicator Light
Right Surface Element Control Knobs
"On" Indicator Light
Left Surface Element Control Knobs
www.gaslandchef.com
8350 Patriot Blvd STE B, N. Charleston, SC 29418
Publicité
