Publicité
Les langues disponibles
Les langues disponibles
12
F. When installing your cooktop in your home, make sure all local codes and
ordinances are followed exactly as stated.
G. Make sure the wall coverings, countertop and cabinets around the cooktop can
withstand heat(up to 200°F(93°C)) generated by the cooktop.
Parts included
• Foam tape
• 2 Hold-down brackets
• 2 Thumbscrews
• Mounting template
Installation Instructions
Preparing the opening
• The following MINIMUM clearance dimensions must be maintained.
If a 30" clearance between the cooking surface and overhead combustible
materials or metal cabinets cannot be maintained, a minimum clearance of 24"
is required and the underside of the cabinets above the cooktop must be
protected with not less than 1/4"-thick flame-retardant millboard covered with not
less than No. 28 MSG sheet steel, 0.015"-thick stainless steel, 0.024"-thick
aluminum, or 0.020"-thick copper.
• Overall cooktop dimensions
• One and one-half inches (1-1/2") minimum vertical clearance between the
cooktop bottom and any combustible surfaces.
• Installations dimensions and clearances
To ensure accuracy, it is best to use template when cutting the opening in the
counter.
1 (844) 538-7890
support@gaslandchef.com
17-1/8
21-1/2
Cooktop
19-7/8
15-7/8
3-1/4
www.gaslandchef.com
8350 Patriot Blvd STE B, N. Charleston, SC 29418
Publicité
