Publicité
Only empty the fuel tank outdoors.
„
If petrol has spilled out or been spilt:
„
Do not start the engine.
„
Avoid ignition attempts.
„
Clean the machine.
„
Allow leftover fuel to evaporate
„
Preparing a fuel mixture
If a mixing ratio of 50:1 is used, we recommend us-
ing a special high-quality 2-stroke oil.
In the case of branded 2-stroke oils, we recommend
a mixing ratio of 25:1.
Tables of fuel mixing ratios
Mixing procedure
25 parts petrol:
1 part mixing oil
2-stroke oil
Mixing procedure
50 parts petrol:
1 part mixing oil
2-stroke oil
Pour petrol and corresponding oil into a suitable con-
tainer in accordance with the table. Mix both parts
thoroughly.
Startup
Caution!
Always carry out a visual inspection before starting
up the machine.
Before use, ensure that all screws, nuts and bolts
„
on the device are securely fastened.
The machine must not be used with loose, dam-
„
aged or worn cutting parts and/or fastening ele-
ments.
Replace damaged or worn parts with original
„
spare parts.
Always operate the trimmer with the guard.
„
Always observe the operating instructions provid-
„
22
Petrol
Mixing oil
1 l
40 ml
3 l
120 ml
5 l
200 ml
Petrol
Mixing oil
1 l
20 ml
3 l
60 ml
5 l
100 ml
ed by the manufacturer of the engine.
Observe local regulations regarding operating
„
times.
Starting the engine
Warning!
Never run the engine indoors.
Toxic fumes!
Before start-up, shorten the cutting string to
13 cm to avoid overloading the engine.
Choke settings:
CHOKE
When starting the machine, please note:
Lay the trimmer flat on the ground without
„
obstacles.
Make sure that the cutting tool is not touching
„
other objects or the ground.
Adopt a safe stance.
„
Hold the machine securely with the left hand.
„
Take hold of the starter cord with the right hand.
Do not stand or kneel on the support bar.
„
Always pull the starter cord straight out. Do not
„
let it snap back too quickly.
Translation of the original operating instructions
RUN
Publicité
