IFM Electronic efector300 SCE18 Notice De Montage page 6

Function and features
The flow monitor monitors liquid media. It senses whether there is a
preset flow (= medium flows) or not (= medium does not flow) and
provides a switching signal.
• For use in T-pieces to DIN 2353.
Installation
Insert the unit into the T-piece (1)
and orientate it. Fasten the nut
(2); always keep the unit in its
orientation.
To avoid malfunction a minimum
distance between the flow mon-
itor and bends, valves or such
like must be observed (fig. 3).
• Min. 5 x pipe diameter
upstream,
• Min. 3 x pipe diameter down-
stream.
6
1
2
min.
min.
5 x D
3 x D
D