Listening To The Radio; Tuning To A Radio Station; Presetting Radio Stations - Sony CMT-SBT20 Mode D'emploi

Listening to the radio

Tuning to a radio
station
1
Press FM  .
2
Perform tuning.
For automatic scanning
Press TUNING MODE  repeatedly until
"AUTO" appears, and then press
TUNING +/–  . Scanning stops
automatically when a station is tuned
in.
If the scanning for an FM station does
not stop, press   to stop scanning,
then perform manual tuning.
For manual tuning
Press TUNING MODE  repeatedly until
"MANUAL" appears, and then press
TUNING +/–  repeatedly to tune to the
desired station. Each time you press
TUNING +/–  , the frequency changes
step by step. If you hold TUNING +/– 
down, the frequency changes
continuously until the button is
released.
Tip
• When you tune to a station that provides RDS
services, the service name or station name
appears on the display (European model only).
• If reception of an FM stereo broadcast is noisy,
press FM MODE  repeatedly to select "MONO"
to select monaural reception. This reduces noise.
14
GB
Presetting radio
stations
You can preset your desired radio stations.
1
Tune to the desired station.
2
Press TUNER MEMORY  .
3
Press PRESET +/–  repeatedly
to select a preset number, then
 .
press
You can also select a preset number by
pressing TUNER MEMORY number (1 to
4)  or  /  /  /   .
"COMPLETE" appears on the display 
and the radio station is registered with
the preset number.
Repeat the steps above to register
further radio stations.
Tip
• You can preset up to 20 FM stations.
• If you select an already-registered preset number
in step 3, the preset radio station is replaced by
the currently tuned-in radio station.
Preset number