Bluetooth Device - Sony CMT-SBT20 Mode D'emploi

Masquer les pouces Voir aussi pour CMT-SBT20:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

BLUETOOTH device

Pairing cannot be performed.
C
Move the BLUETOOTH device closer to the
system.
C
Pairing may not be possible if other
BLUETOOTH devices are present around the
system. In this case, turn off the other
BLUETOOTH devices.
C
Make sure to enter the correct passkey when
selecting the model number (this system) on
the BLUETOOTH device (page 20).
Connection is not possible.
C
The BLUETOOTH device you attempted to
connect does not support the A2DP profile,
and cannot be connected with the system.
C
Enable the BLUETOOTH function of the
BLUETOOTH device.
C
Establish a connection from the BLUETOOTH
device.
C
The pairing registration information has been
deleted. Perform the pairing operation again.
C
Delete the pairing registration information of
the BLUETOOTH device (page 22) and
perform the pairing operation again
(page 19).
The sound skips or fluctuates, or the
connection is lost.
C
The system and the BLUETOOTH device are too
far apart.
C
If there are obstacles between the system and
your BLUETOOTH device, remove or avoid the
obstacles.
C
If there is equipment that generates
electromagnetic radiation, such as a wireless
LAN, other BLUETOOTH device, or a microwave
oven nearby, move them away.
The sound of your BLUETOOTH device
cannot be heard on this system.
C
Increase the volume on your BLUETOOTH
device first, then adjust the volume using
VOLUME +/–  .
There is severe hum, noise or distorted
sound.
C
If there are obstacles between the system and
your BLUETOOTH device, remove or avoid the
obstacles.
C
If there is equipment that generates
electromagnetic radiation, such as a wireless
LAN, other BLUETOOTH device, or a microwave
oven nearby, move them away.
C
Turn down the volume of the connected
BLUETOOTH device.
To reset the system to factory
settings
If the system still does not operate properly,
reset the system to factory settings.
1
Press /  to turn on the system.
2
Press and hold FUNCTION  and   on
the unit at the same time until "RESET"
appears on the display  .
All user-configured settings, such as preset radio
stations, timer, the clock, and the pairing
information of BLUETOOTH devices are deleted.
If the problem persists after doing all of the
above, consult your nearest Sony dealer.
Note
• If you dispose of the unit or give it to another
person, reset the unit for security.
31
GB

Publicité

Table des Matières
loading

Table des Matières