Remote Control - Sony CMT-SBT20 Mode D'emploi

Remote control


/ (on/standby) button
Use to turn on the system, or set it to
standby mode.

Remote control sensor

(BLUETOOTH) indicator
Lights up or blinks to show the
BLUETOOTH connection status.

Unit: FUNCTION/PAIRING button
• Use to select the source. Each press
changes to the next source in the
following sequence:
CD  USB  BT AUDIO  FM 
AUDIO IN
• Press and hold to enter the
BLUETOOTH pairing mode.
Remote control: FUNCTION buttons
(CD, USB, BLUETOOTH, FM, AUDIO IN)
Use to select the source.
6
GB

Unit:  (play/pause)* button
Remote control:  (play)* / (pause)
button
Use to start or pause playback.

 (stop) button
Use to stop a playback.

N-Mark
Place a smartphone/tablet equipped
with the NFC function close to this mark
to perform BLUETOOTH registration,
connection or disconnection by a one
touch action (page 21).

/ (previous/next) buttons
Use to select a track or file.
TUNING +/– buttons
Use to tune to a desired radio station.
Remote control: / (fast rewind/
fast forward) buttons
Use to fast forward/fast rewind a track
or file.
Remote control: PRESET +/– buttons
Use to recall the preset stations.

 (open/close) button
Use to open and close the disc tray  .

Display

Disc tray
Use to load a disc (page 11).

Unit: VOLUME control
Remote control: VOLUME +*/– button
Use to adjust the volume.

(USB) port
Use to connect a USB device
(page 16).

BLUETOOTH MENU button
Use to open or close the BLUETOOTH
menu (page 20, 23, 24).