Publicité
Les langues disponibles
Les langues disponibles
ELECTRICAL STRIP
1. Attach electrical strip mounting rail to vertical
uprights using one 3/8 x 1" Allen head bolt and
3/8" strut nut per side. (See Figure 19)
Figure 19
3/8" Strut Nut
2. Attach electrical strip to mounting rail using four
3/16 x 3/8" round head bolts and four 3/16" hex nuts.
(See Figure 20)
Figure 20
3/16" Hex Nut
IMPORTANT! When assembly is complete, connect remaining ring terminal to
ground cordon underside of bench top to the center of a grounded outlet.
See "Wiring Bench Top" on Page 5.
PAGE 8 OF 24
ASSEMBLY CONTINUED
3/8 x 1"
Allen Head Bolt
3/16 x 3/8"
Round Head Bolt
BIN HOLDER
1. Attach metal bin holder to vertical uprights at
desired height using two 3/8 x 1" Allen head bolts
and two 3/8" strut nuts. (See Figure 21)
Figure 21
Metal Bin Holder
1-800-295-5510
uline.com
3/8 x 1"
Allen Head Bolt
0523 IH-10871
Publicité
