Publicité
Les langues disponibles
Les langues disponibles
LIGHT FIXTURE
1.
With second person, attach light fixture support frame
to vertical uprights using four 3/8 x 1" Allen head bolts
and four 3/8" strut nuts. (See Figure 15)
Figure 15
3/8 x 1" Allen
Vertical
Head Bolt
Upright
Light Fixture Support Frame
2. Attach light fixture to light fixture support beam
with two 1/4-20 x 2¼" flat Allen machine screws, two
finish washers, four 1/4" fender washers, four 1/4" flat
washers and two 1/4" locknuts. (See Figure 16)
NOTE: Remove knockouts from light fixture
before attaching to light fixture support beam.
3. Mount the light fixture support beam to light
fixture support frame using one small plastic washer,
large plastic washer and two knobs per side.
(See Figure 16)
Figure 16
1/4 x 2¼"
Machine Screw
Finish Washer
Large Plastic
Washer
Small Plastic
Washer
Locknut
PAGE 7 OF 24
ASSEMBLY CONTINUED
3/8" Strut Nut
Knob
Flat Washer
Light Fixture
Light Fixture
Support Beam
Fender Washer
SHELF
1. Choose desired height on vertical uprights and
mount shelf brackets using four 3/8 x 1" Allen head
bolts and 3/8" strut nuts. (See Figure 17)
Vertical Upright
3/8" Strut Nut
Shelf Bracket
2. Lay shelf on brackets with equal overhang on
each side.
3. With second person, install #12 x 3/4" Phillips
pan head screws into underside of shelf support
beam ends and through shelf support brackets to
secure shelf. (See Figure 18)
Figure 18
Shelf
Figure 17
3/8 x 1"
Allen Head Bolt
#12 x 3/4" Phillips
pan head screws
Shelf Support
Beam
0523 IH-10871
Publicité
