Publicité
Les langues disponibles
Les langues disponibles
4. With frame on its side, install hydraulic piston into
side hole of frame. Secure using snap ring pliers
and snap ring. Repeat for opposite side.
NOTE: Ensure white nylon rectangle
faces upward. (See Figure 2)
Figure 2
Snap Ring
5. Install leg assembly over hydraulic pistons. Secure
legs to frame using two 5/16-18 x 1" hex head bolts
and flat washers per leg. Do not tighten. (See Figure 3)
NOTE: Do not pinch hydraulic lines.
NOTE: Install with notch side facing interior
side of bench. (See Figure 3)
Figure 3
Notch
PAGE 3 OF 24
ASSEMBLY CONTINUED
6. Assemble eight 1/4-20 x 1/2" hex head bolts, flat
washers and locknuts loosely into modesty panel.
(See Figure 4)
Figure 4
7.
With second person, slide modesty panel into legs
with bolt heads channeled into leg slots. (See Figure 5)
Figure 5
NOTE: Do not tighten bolts.
0523 IH-10871
Publicité
