Kortel Design Kuik III Notice D'utilisation page 56

Preparation for take-off
Connection in the harness
Once the pre-flight has been carried out and validated, it is
time to properly connect to the harness:
- Put the harness on using the straps.
- Connect the left and right thigh loops
- Connecting the chest strap
1
Just as much as the harness settings, the pilot's take-off gestures
Just as much as the harness settings, the pilot's take-off gestures
are crucial for ease of installation.
are crucial for ease of installation.
More detailed information is available at www.korteldesign.com. More detailed information is available at www.korteldesign.com.
1
2
2
1
With the cocoon installed, the installation must be completed
as follows:
- Close the cocoon with the anti-forget system
- Close the cocoon avec le clip latéral
3
4
Despite the presence of an anti-forget system, it is essential to
Despite the presence of an anti-forget system, it is essential to
pay particular attention during the attachment phase in the
pay particular attention during the attachment phase in the
harness. harness.
56
KUIK III
3
4