Kortel Design Kuik III Notice D'utilisation page 51

Preparing your harness
Installation of the reserve parachute
When the harness is equipped with the cocoon, the
installation of the rescue parachute in the container must be
carried out as follows:
1 Connect the handle to the rescue parachute, using a lark's
head.
2 Connect the rescue risers to the parachute using a suitable
connection (see page 16).
3 Connect the rescue risers to the shoulders, using a suitable
connection (see page 16).
4 Insert the rescue risers into the guide tube and close the
guide tube with the zip.
1
4
2
3
51
Connection handle - parachute
1
Shoulder connection points
2
Closing zip
3
Zipped guide sleeve
4
Velcro guide sleeve
5
Emergency container
6
5
6
KUIK III