Publicité
Les langues disponibles
Les langues disponibles
Preparing your harness
Back Protection
Your harness is equipped with an integrated airbag-type back
protector. This protection has been certified in the laboratory
in accordance with the requirements of the test criteria:
- CE - SP-004
- EN - Fpr EN 1651-2018
- LTF - 2. DV LuftGerPV §1, Nr. 7C
On delivery, your back protection complies with all these
criteria. The best protection is offered when it is fully inflated.
Avoid contact of the airbag cover with sharp or pointed objects
Avoid contact of the airbag cover with sharp or pointed objects
that could damage the cover.
that could damage the cover.
Back protection can also be subject to more insidious attacks,
such as repeated rubbing (on the ground before take-off or on
landing), or UV attacks. As the airbag is integrated into a
reversible bag system, it must also be taken into account that
the envelope constituting the airbag is common to that of the
bag. Thus, when the bag is subjected to aggression, the same
applies to protection. It is therefore necessary to take
particular care of the bag. We recommend the use of the
protective cover as soon as possible, to limit all kinds of
aggressions on the bag.
If you have any doubts about the condition of your back
If you have any doubts about the condition of your back
protector, please contact your dealer or our customer service
protector, please contact your dealer or our customer service
department as soon as possible.
department as soon as possible.
Airbag operation and use :
The airbag consists of 2 inflation chambers, one high and one
low. In flight, with the help of the relative wind, the air enters
the lateral and frontal scoops and fills the lower chamber.
When the lower chamber is full, the air enters the upper
chamber and fills it in turn.
53
KUIK III
Publicité
