Bid Chip/Key; Menu Structure With A Bid Chip/ Key Connected - ROBBE POWER PEAK TRIPLE 360 W EQ-BID Notice D'utilisation

POWER PEAK® TRIPLE 360 W EQ-BID
8.

BID CHIP/KEy

Insert
chip
Withdraw
chip

8.1 MENU STRUCTURE WITH A BID CHIP/ KEy CONNECTED

'+' but-
ton
'ENTER'-
Taste
'+' but-
ton
'+'
button
'+' but-
ton
© robbe Modellsport
Operating instructions
As soon as a BID chip/key is connected to the char-
ger, the charger switches to the start display. Now
it can be selected whether a BID chip key is to be
programmed or a charge process started (see chap-
ter 9). The same applies if the charger is switched
on with a chip connected.
All parameters for the battery, for which this chip is
to be used, can be set from this menu (see chapter
8.2). In addition, stored charge or discharge values
can be read (see Section 8.3). The programming
menu is exited on removing a BID chip/key and the
Start display is shown again.
ENTER'
button
ENTER'
button
ENTER'
button
'+'
button
'+'
button
'+'
button
16
Order No.
8562
ENTER'
button
ENTER'
button
ENTER'
button