Sony DPS-V77 Mode D'emploi page 7

Names and Functions of Parts
Rear panel
1
1 AC power cord socket
For connecting the effector to an AC power outlet
using the supplied AC power cord.
2 MIDI THRU/OUT terminal
For sending and/or relaying MIDI command signals
from the effector to other components
(see page 26 to select THRU or OUT).
3 MIDI IN terminal
Input for MIDI command signals. Use a commercially
available MIDI cable to connect this terminal to another
component's MIDI OUT (or THRU) terminal.
4 PEDAL 1 and 2 jacks
Inputs for pedal switches and/or volume control
(pages 21 and 25).
5 DIGITAL I/O terminal
Use digital interface cable RK-V77A (for AES/EBU) or
RK-V77S (for SPDIF) to make digital connections
between the effector and other components
(pages 8, 12, 13 and 29).
2 3 4 5 6 7 8
11 10
6 BALANCED OUTPUT jacks
Balanced output jacks for channel 1 and channel 2
(pages 9 and 10).
7 STANDARD OUTPUT jacks
Standard output jacks for channel 1 and channel 2
(pages 9 and 10).
8 STANDARD INPUT jacks
Standard input jacks for channel 1 and channel 2
(pages 9 and 10).
9 BALANCED INPUT jacks
Balanced input jacks for channel 1 and channel 2
(pages 9 and 10).
10 INPUT level selector switch
Use to set the input level of the STANDARD INPUT jacks
(8) to match the output level of the connected equipment.
You can select a –20 dB or +4 dB input level.
11 OUTPUT level selector switch
Use to set the output level of the STANDARD OUTPUT
jacks (7) to match the input level of the connected
equipment. You can select a –20 dB or +4 dB output level.
9
7
EN