Getting Started; Protecting User Memory; Organizing User Memory - Sony DPS-V77 Mode D'emploi

Protecting USER Memory

This function locks the contents of the specified USER memory
number so that new effects cannot be saved to that number and
the contents of that memory number cannot be deleted or written
over by a copy command.
1 Press SYSTEM.
2 Press FUNCTION B to choose "MEMRY."
3 Press FUNCTION E to choose "PROTECT."
The operation dial or shuttle ring selects the memory number.
FUNCTION F turns protection on or off.

Organizing USER Memory

Since each of the USER memory banks can hold up to 99 effects, you
may find it difficult to keep track of where certain effects are located.
The following procedures show you how to copy, move, swap,
and erase effects in the user memory so that you can organize the
effects into a comfortable configuration.
Copying a memory file (Copy)
This function lets you copy the contents of a selected USER or
PRESET memory number to a specified USER memory number.
1 Press SYSTEM.
2 Press FUNCTION B to choose "MEMRY."
3 Press FUNCTION A to choose "Copy."
FUNCTION A [SOURC] selects the source memory number to
be copied.
FUNCTION B [DEST] specifies the destination.
FUNCTION F [EXEC] executes the copy operation.
Moving USER memory (Move)
This function lets move the contents of a specified USER memory
number to another USER memory number.
1 Press SYSTEM.
2 Press FUNCTION B to choose "MEMRY."
3 Press FUNCTION B to choose "Move."
FUNCTION A [SOURC] selects the source memory number to
be moved.
FUNCTION B [DEST] selects the destination.
FUNCTION F [EXEC] executes the move operation.

Getting Started

Exchanging USER memory (XCHG)
This function lets you exchange the contents of two USER memory
numbers.
1 Press SYSTEM.
2 Press FUNCTION B to choose "MEMRY."
3 Press FUNCTION C to choose "XCHG."
FUNCTION A [MEM1#] selects the first memory number to be
exchanged.
FUNCTION B [MEM2#] selects the second memory number to
be exchanged.
FUNCTION F [EXEC] Executes the exchange operation.
Deleting USER memory (DEL)
This function lets you delete the contents of a USER memory number.
1 Press SYSTEM.
2 Press FUNCTION B to choose "MEMRY."
3 Press FUNCTION D to choose "DEL."
The operation dial or shuttle ring selects the memory number.
FUNCTION F [EXEC] executes the delete operation.
23
EN