Pallmann GECKO STAR Traduction Du Mode D'emploi Original page 32

9.2.2 Replacing the spare worn fasteners (Q)
1 Switch the machine off.
2 Unplug the mains plug.
3 Loosen the 6 screws (7 = TX20) of the steel disc
4 Pull away the worn fasteners and remove any adhesive residue using a
suitable thinning agent.
5 Affix any replacement fasteners, centring them to the cuts.
6 Reassemble the disc again in reverse order.
10. Disposal
Power tools do not belong with household waste. Please observe the national legi
slation and recycle the packaging, accessories and tool accordingly.
11. Troubleshooting
Translation of the original instruction
GECKO STAR (230V), Parquet edge sander
Long sanding attachment
Long sanding attachment
Sh t
Translation of the original instruction
GECKO STAR (230V), Parquet edge sander
Long sanding attachment
Long sanding attachment
Short sanding attachment
High level of vibration Machine wearing Send machine parts worn out in for repair
Short sanding attachment
Fault Possible cause
di tt h t
Remedial action
Ø 150mm
Ø 178mm
Ø 150
Ø 150
Ø 178
Ø 150
Ø 178