Publicité
Les langues disponibles
Les langues disponibles
6.3 Installation of the dust bag (G)
Caution! Use original FRANK dust bags exclusively for the GECKO STAR.
The dust bag must be installed firmly on the dust tube before sanding work commences
Caution!
.
Unintentional activation of the machine may present danger. The machine must be switched off
and the mains connector unplugged for all work on the machine.
Steps:
1.
Pull the dust bag over the dustbag hanger (1).
2.
Fasten the dust bag in place with the cord (2).
3.
Fit the dust bag with the hanger onto the tube.
Check the dust bag prior to each commissioning.
Switch on the machine and check the dust bag for leaks and th
e correct seating in the area of the dust tube connection.
6.4 Disposal of sanding dust / Emptying the dust bag
1
2
Keep the dust bag opening closed.
3. Empty the dust bag outdoors into a nonflammable waste bin.
Caution! Risk of fire!
Because of the fire risk, the sanding dust contained in the dust bag must always be di
sposed of immediately every time the machine stops or when sanding is completed.
The sanding dust must be disposed of in a fireproof, non-
flammable container. The container must be covered with a fireproof, non-
flammable lid. Store the container only outdoors.
Caution!
When a third of the dust bag is filled with sanding dust at the latest, empty the dust bag.
Otherwise, the dust absorption performance of the machine will deteriorate.
The sanding dust must be disposed of in a fireproof, nonflammable container.
The container must be covered with a fireproof, nonflammable lid.
Store the container only outdoors.
Caution!
Always wear a dust mask when disposing of the sanding dust. A dust mas
k is supplied as accessory with the machine.
Remove loose dust by gently tapping on the dust bag.
Carefully open the draw cord on the dust bag and remove the bag.
Publicité
