Publicité
Les langues disponibles
Les langues disponibles
Installing
it properly
1.
2.
Allow 1/2 inch (1.25 cm) space on each side and at
the top of the refrigerator for ease of installation.
If the hinge side of the refrigerator is to be against
a wall, you might want to leave extra space so the
door can be opened wider.
3. The refrigerator can be flush against the back wall.
Leveling
it
Your refrigerator has two front leveling screws - one on
the right and one on the left. To adjust one or both of
these, follow the directions below.
1.
2.
3.
4.
5.
Remove base grille. (See page 16.)
To raise front, turn screw clockwise.
To lower front, turn screw counterclockwise.
Check with level.
Replace base grille. (See page 16.)
ill
Right to raise;
ieft
to lower
Use a screw-
driver to adjust
screw
Publicité
