Shure PGA98D-XLR Guide De L'utilisateur page 4

Optional Accessories and
Replacement Parts
Foam windscreen for PGA98H and PGA98D
microphones
Drum mounting clip for PGA98D
Specifications
Type
Electret Condenser
Polar Pattern
Cardioid
Frequency Response
60 to 20,000 Hz
Output Impedance
at 1 kHz
850 Ω
Sensitivity
at 1 kHz, open circuit voltage
-52 dBV/Pa[1] (2.51 mV)
Maximum SPL
1 kHz at 1% THD, 1 kΩ load, typical
130 dB SPL
Self Noise
A-weighted, typical
27 dB SPL-A
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2
with respect to pin 3
Connector
Three-pin professional audio (XLR), male
Weight
210 g (0.5 lbs)
Housing
Cast Zinc
Power Requirements
11 to 52 V DC phantom power (2 mA)
[1] 1 Pa=94 dB SPL
4
Certifications
This product meets the Essential Requirements of all relevant
European directives and is eligible for CE marking.
AP98WS
AP98DM