STERWINS 900 JET-3 Notice De Montage, Utilisation Et Entretien page 199

Les langues disponibles

• Do not use any sharp tool (cutter, knife...) when unboxing, you

may damage the product.

• When unboxing, take the pump with the carrying handle (7)

• Do not use the power cord to lift, carry or transport the

machine.

• Do not scrape the power cord across sharp edges and ensure

that it does not get pressed.

4.2 INSTALLATION

Tightly screw the pump

Attach the pump to a ﬂat level surface with suitable screws and silent block if necessary.

Suction hose

Assemble the different elements together according to the illustration. In case screw are necessary : tight

it with appropriate tool.

• As a basic principle, we recommend using:

- A preliminary filter, in order to avoid unnecessary damage to the pump as a result of stones and solid

foreign bodies.

- A suction-hose set with suction hose and an check valve with a strainer (in order to prevent long

priming periods).

• If you cannot obtain a suction-hose set, please purchase :

- an 25 mm (1") intake hose

- a check valve with a strainer

- 2 hose clamps 2 standard adapters (one for the suction hose, one for the discharge line) and assemble

the suction-hose set yourself using a standard adapter and a clamp.

Attach the filter to the wall. Make sure that the vibrations of the pump do not damage this

installation (flexible connection is strongly recommended)

4.3 FIRST USE

Pay particular attention using the machine for the first time : focus and dedicate all your attention to this

first use.

Setting up your pump

illustration 2.2

DANGER! Risk of injury due to electric shock.

Warning! Do not plug in before installation is fully completed !

CAUTION ! Always wear safety glasses and gloves during

installation.

illustration 2.3

WARNING ! Read the « SAFETY INSTRUCTION » section at the

beginning of this manual including all text under subheading

therein before using this product.

199