Aosom 370-240V80 Instructions D'assemblage page 7

1
Insert the light frame into the connector and
fasten with 1 screws as the photo show.
Repeat the process for the other side.
3
Washer
(12 x1.5mm)
Assemble all the parts in sequence as the
picture shown and use the socket tool
fastened. Repeat the process for the other
side.
Assembly
Screw
(4 x14mm)
Front wheel
Washer
(8x1.3m)
Nut
(M8)
2
Insert the light decorate in the light frame as
photo show.
4
Assemble all the parts in sequence as the
picture shown and use the socket tool
fastened. Repeat the process for the other
side.
7
Rear wheel
Washer
(8x1.3m)
Nut
(M8)