FMS Dago Red Manuel D'utilisation page 5

Model assembly
Main wing assembly
1. Fit the wing set into the fuselage cutouts and
secure with the included screws.
Horizontal stabilizer installation
1. Slide the horizontal stabilizer spar into the slot
near the rear of the fuselage.
2. Connect the two pieces (left and right) horizon-
tal stabilizer onto the spar and fit them into the
fuselage cutouts.
3. Secure the two piece (left and right) horizontal
stabilizer onto the fuselage with the included
screws.
KA2.6*12
5
HKM3.0*20
E
N