Dirt Devil Power DUO UD70170 Manuel page 16

CLEAN THE
BRUSHROLL
1. Turn your Power Duo
Use a Phillips screwdriver to
take off the 6 screws. Lift off
the bottom plate.
3. Clean the brushroll.
16
over. 2. Place roller lifter in
™
4. Lift up the roller lifter here and
CAUTION
To reduce the risk of injury from moving parts - Unplug
before servicing.
upright position.
put the plate back on. Secure
with screws then push the
Roller Lifter down until it clicks.