Publicité
Les langues disponibles
Les langues disponibles
5. OPERATION
WARNING
Connect the power plug to a certified, grounded power outlet only.
Before you start exercising, read through and follow all advices and
instructions mentioned in chapter "Training and operating instructions".
•
When you begin training, start at a low speed until you are used to using the
treadmill.
•
Safely stop exercising by pressing the STOP button.
START
1. Press the
2. Now the system enters into a 3 second countdown. The buzzer emits a sound. The
speed window displays the countdown. After 3 seconds, the treadmill will start to
run at a speed of 0.8 km/h.
3. After starting, press the
4. Press the
FUSE
•
Check if the belt is lubricated sufficiently.
•
Check if the belt is sufficiently tight; see "Maintenance, cleaning and care".
Note
When loaded, the product has a higher noise emission than unloaded.
SP-TM-1100-B-G-iE-IM-V01-INT.indb 36
SP-TM-1100-B-G-iE-IM-V01-INT.indb 36
button.
or
buttons to set the speed.
button to stop the treadmill.
36
27/09/2021 9:29:53 pm
27/09/2021 9:29:53 pm
Publicité
