Publicité
Les langues disponibles
Les langues disponibles
11. ATTACHING THE CYLINDER WIRE RETAINER
Parts Required:
1
x
LP Gas Cylinder Wire Retainer (#15)
Installation:
•
Mount the LP Gas Cylinder Wire Retainer between the Front-Right Leg and
Back-Right Leg
12. ATTACHING THE ASH TRAY BRACKET
Parts Required:
1
x
Ash Tray Bracket (#28)
3
x
Screw (#B)
Installation:
•
Mount the Ash Tray Bracket to the bottom of the Main Barrel / Hopper
Assembly.
Use: 3 pcs M5 x 12 screws.
13. SECURING THE ASH TRAY BRACKET
Parts Required:
1
x
Ash Tray Bracket (#28)
2
x
Screw (#B)
Installation:
•
Tighten the Ash Tray Bracket to the Cart Front Panel.
Use: 2 pcs M5 x 12 screws.
14. INSTALLING THE ASH CLEANING PULL HANDLE ASSEMBLY
Parts Required:
Ash Cleaning Pull Handle Assembly (#27)
1
x
Installation:
•
Insert the Ash Cleaning Pull Handle Assembly to the hole on the Ash Tray
Bracket and tighten the handle with the bottom of Main Barrel / Hopper
Assembly.
15. INSTALLING THE ASH TRAY
Parts Required:
1
x
Ash Tray (#29)
Installation:
•
Insert the Ash Tray to the Ash Tray bracket.
12
11
15
12
13
14
INSIDE VIEW
27
15
29
28
Publicité
