Publicité
Les langues disponibles
Les langues disponibles
RBC-3200-CA
FeAtuReS
Front Loading
The sophisticated front loading system provides easy access to hopper, allows larger hopper capacity, and is more durable
than a back loading system.
Automatic Self-test
The machine will automatically perform a self-test when it is turned on. If there is a problem, the preset display will show an
error code. (See ERROR CODE DISPLAYS.)
Auto and Manual Start Modes
The machine is preset to automatically start counting bills once placed into the hopper. To change to the manual start
mode, press MNL, insert the bills into the hopper, and press RESTART.
Dimension Detection
The dimension detector measures the width of the center of each bill by using infrared light. If the detector finds an odd-
sized bill, the machine will stop counting to allow removal of the bill and display the error code on the preset display. To use
dimension counterfeit detection, press DD. The dimension (DD) counterfeit detection sensitivity level is preset on level 1
(highest level).To adjust width sensitivity level, press SET and select 1-5, 1 for highest, 5 for lowest.
To adjust width sensitivity level, press SET and select 1-5, 1 for lowest, 5 for highest.
Common and Batch Counting Modes
The machine is preset to common counting mode, which automatically counts all bills placed into the hopper. To count bills
in batches, press BATCH. Batching is preset to 100 bills. To change batch amount, press C to clear, and use the keypad to
enter a batch number between 1 and 999. Press SET to save the setting.
Add Mode
The ADD mode displays cumulative total of all bills counted. To turn ADD mode on, press ADD.
7
Publicité
