LUND L2R Instructions D'installation

Care and Cleaning
• Wash only with mild soap and dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Lund® branded products offered by Lund International, Inc. We take the utmost pride in our products and
want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in terms of fit,
durability, finish, and ease of installation.
Lund International, Lund Accessories Division
775 Tipton Industrial Drive, Building 2, Suite F
800-328-5863 • Fax 800-782-5448 • Visit us at lundinternational.com
© 2004 Lund International, Inc. All rights reserved.
Lund® and the Lund® logo are trademarks of Lund International, Inc.
46015
Rev. -
Lawrenceville, GA 30045
Page 4 of 4
Installation Instructions
2
L ™ Cab Fairing
R
For proper installation and best possible fit, please read all instructions BEFORE you begin. Please inspect your Cab Fairing
BEFORE painting or mounting. Parts which have been sanded, painted, drilled or modified cannot be returned. Use standard prep
and painting methods. For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-323-5863.
Important Safety Information
• Before driving, ensure the cab fairing is properly anchored to the vehicle.
CAUTION:
• Side Sails/Crossbar and Tubing not intended to handle load.
• When securing loads to side rails do NOT exceed 200 lbs. or the vehicle manufacturer's suggested weight limits for the
vehicle's stake pocket whichever is less.
• Periodically check all components for tightness.
• Lund International, Inc. recommends the use of Thread Lock or Silicone when fastening bolts.
• Do not use cleaning solvents of any kind.
Contents
Black Tie Down
Qty. 4
Crossbar
Qty. 1
Bottom End Top End
Bottom End
Cap Halves Caps Halves
Cap Halves
Driver Passenger Qty. 2
Qty. 1
Qty. 1
Extrusions
Qty. 2
Passenger Side Sail Driver Side Sail
Qty. 1 Qty. 1
Tools Required
Silicone/
Standard Allen Wrench Set
Thread Lock
Part Numbers:
99-04 GM/Chevy 13501
04-05 Ford
02-05 Dodge FS 13503
Rail Tie Down 5/16-18 J-Nut
3/8" Eye Bolt
Qty. 4 Qty. 4
Qty 2
3/8"-16 x 3"
SHCS
Qty. 4
Rear End Cap
Qty. 2
Gasket
Qty. 2
5/16"-18 x 1"
5/16"-18 x 2"
Square Head Bolt
Hex Head Bolt
Qty. 4
Qty. 4
Tie Down Base
Front End Cap
Qty. 4
Qty. 2
5/16"-18 Flange 5/16"-18
Bolt Qty. 4 Square
Head Nut
Qty. 4
Cap
#6 x 1/4" Screw
Qty. 4
Side Rail Bracket Qty. 4
Gasket Qty. 2
Qty. 2 Rolls
Hardware
Kit #
1/4" x 1"
41087
SHCS
Tube Qty. 4
Qty. 2
Standard Wrenches Philips Head Screw Driver
Page 1 of 4
13502
46015
Rev. -
Barrel Screws
Qty. 8
3/8"-16 x 1"
Hex Head Bolt
Qty. 2
1/2" x 1"
Washer Type B
Spring
5/16" Qty. 4
Qty. 4
3/8" Qty. 2
Washer Fence
5/16" Qty. 4
Lock Washer
5/16" Qty. 4
3/8" Qty. 2