EUROM Sani Wi-Fi 600 Mode D'emploi page 24

Set the countdown timer
1. Press the Timer button once or multiple times to set the countdown timer, from 00 to 24
in whole hours.
Eurom Smart App
The device can be operated using an app on a smartphone or tablet. The Eurom Smart app
can be used to:
•
switch the device on and off (without anticipation);
•
regulate the temperature;
•
set daily timer settings on and off, on the weekly timer.
1. Open the Eurom Smart App manual with the
QR code (Figure 13) or go to
www.eurom.nl/nl/manuals.
2. Complete the Eurom Smart App manual.
•
When the device is connected with Wi-Fi, the
Wi-Fi symbol appears on the screen.
•
If the Wi-Fi symbol is blinking there is no
connection.
Smart Timer
1. Create a schedule with days and times in the Eurom Smart app. Timer settings set in the
app:
•
will be stored on the device;
•
will not be visible on the device;
•
will remain available if Wi-Fi disconnects;
•
will remain available if the device is switched off or unplugged;
•
can only be removed via the app.
2. Check the data in the app regularly.
Reset Wi-Fi connection
1. Press and hold the Timer button until the Wi-Fi symbol starts blinking alternating fast
and slow. Existing connections will be deleted and a new connection can be made.
Switch off Wi-Fi connection
1. Press and hold the Minus button until a short beep sounds. The Wi-Fi is switched off and
the Wi-Fi symbol will disappear from the screen.
2. Press and hold the Minus button until a short beep sounds. The Wi-Fi is switched on and
the Wi-Fi symbol will appear on the screen.
24
Figure 13