EINHELL TE-MB 18/127 U Li Instructions D'origine page 24

4. Technical data
Cordless bandsaw
Motor power supply: ............................... 18 V DC
Idle speed: ............................................240 min
Blade speed: .......................................120 m/min
Blade: ................................ 1141 x 13 x 0.65 mm
Tooth pitch in teeth per 25.4 mm: ........................
.......................................10/14 tpi (teeth per inch)
Max. cutting width: ................................. 127 mm
Maximum cutting height: ........................ 115 mm
Protection class: ........................................III /
Weight: ............................................ approx. 6 kg
Base frame for cordless bandsaw
Swiveling range: ....................................... 0°- 47°
Weight: ..........................................................7 kg
Cutting capacity for rectangular tube:
90°: ................................................. 100 x 80 mm
45°: ................................................... 40 x 40 mm
Cutting capacity for circular tube:
90°: .....................................................Ø 100 mm
45°: .......................................................Ø 40 mm
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level ........................ 86 dB(A)
pA
K uncertainty ........................................ 3 dB(A)
pA
L sound power level ........................... 99 dB(A)
WA
K uncertainty ........................................ 3 dB(A)
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Handle
Vibration emission value a
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
Anl_TE-MB_18_127_U_Li_SPK13.indb 24 Anl_TE-MB_18_127_U_Li_SPK13.indb 24
-1
< 2.5 m/s
2
h
2
- 24 -
GB
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
5. Before using the machine
Warning!
Always remove the battery before making adjust-
ments to the machine.
5.1 General information
•
The machine must be set up where it can
stand securely.
•
All covers and safety devices must be proper-
ly fitted before the machine is switched on.
•
It must be possible for the blade to run freely.
•
When working with wood that has been previ-
ously processed, watch out for foreign bodies
such as nails or screws, etc.
•
Before you actuate the On/Off switch, make
sure that the blade is correctly fitted and that
the machine's moving parts run smoothly.
01.02.2024 09:44:02 01.02.2024 09:44:02