Publicité
Les langues disponibles
Les langues disponibles
Cabinet Requirements
A. See chart.
B. See chart.
C. See chart.
D. See chart.
E. See chart.
F. 18" (45.7 cm) min. clearance upper
cabinet to countertop
G. 94" (1.9 cm) back of cabinet cutout to gas
opening cutout
H. 678" (16.1 cm) gas opening cutout depth
1.12%" (31.7 cm) gas opening cutout width
d. 22 34" (56.5 cm) cabinet cutout depth
K. 2" (5.1 cm) cabinet side to gas cutout
L.6" (15.2 cm) min. distance on both sides of
the cooktop to the side wall or other
combustible material above cooking surface
M. 24" (61.0 cm) cabinet depth
N. 7%" (18.4 cm) cabinet depth to countertop
O. Notch to be equal on both sides
P. 13" (33.0 cm) upper cabinet depth
Size
Model
A**
B*
c
D
E
Cooktop Cutout
Cooktop to
Optional
Cabinet and
Countertop Only
to Back Wall
Cabinet
Backguard and
Countertop
Upper Cabinet
Opening
30" (76.2 cm)
KGCU407
154" (4.4 cm)**
30" (76.2 cm)
30" (76.2 cm)
29%" (74.3.cm) — 30" (76.2 cm) or
297%" (75.9 cm) for
zero clearance
36" (91.4 cm)
KGCU462
1%" (3.8 cm)**
42" (106.7 cm)
36" (91.4 cm)
3514"
36" (91.4 cm) or
KGCU463
154" (4.4 cm)
(89.5 cm)
35%" (91.1 cm) for
KGCU467
1%" (4.4 cm)
zero clearance
48" (121.9cm)
KGCU482
1%" (3.8 cm)**
42" (106.7 cm)
48" (121.9 cm)
47%" (120.0 cm)
48" (121.9 cm) or
KGCU483
154" (4.4 cm)**
47%" (121.6 cm) for
KGCU484
1%" 8.8 cm)
zero clearance
*NOTES: Dimension "B" can be reduced by 6" (15.2 cm) when bottom of wood or metal cabinet is covered by not less than
0.25" (6.4 mm) flame retardant millboard covered with not less than No. 28 MSG sheet metal, 0.015" (0.4 mm) stainless steel,
0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
If installing a range hood above the cooktop, follow the range hood instructions for dimensional clearances above the cooktop
surface.
™ NOTE:
If backwall is constructed of a combustible material and a backguard is not installed, a minimum clearance of dimension A
+ 6" (15.2 cm) is required for 48" (121.9 cm) cooktops and cooktops with a
grill.
Publicité
