Ryobi RLT26CDY Manuel D'utilisation page 13

EN
FR DE ES IT
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
NAME
Safety Alert Symbol
R e a d Yo u r O p e r a t o r 's
Manual
Wear eye, hearing and
head protection
Keep bystanders away
No blade
RPM Decal
Boots
Gloves
No Smoking
Petrol
Oil
Mix Petrol and Oil
Switch
PT NL SV DA NO FI
English (Original instructions)
SYMBOLS
EXPLANATION
Indicates danger, warning or caution. It means attention! Your
safety is involved.
Your manual contains special messages to bring attention to
potential safety concerns as well as operating and servicing
information. Please read all the information carefully to ensure
satisfaction and safe use.
Wear eye, hearing and head protection when operating this
equipment.
Beware of thrown or flying objects. Keep all bystanders at least
15 m away.
Do not use blade(s) on the product.
Rotational direction and maximum speed of the shaft for the
cutting attachment.
Wear non-slip safety footwear when using this equipment.
Wear non-slip, heavy-duty gloves.
Do not smoke when mixing fuel or filling fuel tank.
Use unleaded gasoline intended for motor vehicle use with an
octane rating of 91 ([R+M]/2) or higher.
Use synthetic 2-stroke oil for air cooled engines.
Mix the fuel mix thoroughly and also each time before refuelling.
On/Off Switch
I = ON to Run
O = OFF to Stop
Conforms to all regulatory standards in the country in the EU
where the product is purchased.
HU CS RU RO PL SL
11 11
HR ET LT LV SK BG