Télécharger Imprimer la page

Peavey 6505+112 Combo Mode D'emploi page 20

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
ENGLISH
6505
®
+ 112 Combo
Guitar Amplifier
After forging the sound of aggression for more than 15 years, Peavey is making its highly respected, high-gain 6505
Series
®
amplifier available for the first time in a 1x12 combo-amp configuration. The new 6505 Plus 112 combo harnesses the full gain
and legendary tone of the Peavey 6505 Series, which since 1991 has defined the sounds of extreme rock guitar, into a format
that is equally suited to clubs, rehearsal rooms and studios. Five select 12AX7 preamp tubes and a pair of 6L6GC power-amp
tubes provide the tonal foundation for the 6505 Plus 112 combo, while patented circuitry such as Peavey's Resonance control
tweak its legendary tone. Both the Lead and Rhythm channels feature independent three-band EQ, pre/post gain controls
and Presence and Resonance adjustment. The Rhythm channel also includes a footswitchable Crunch boost. The 6505 Plus
112 combo also features the Peavey MSDI
microphone-simulated direct interface, which eliminates the need for miking by
allowing users to route the amp's signal directly to a recording device or mixing console. Additional features include three-
spring reverb, effects loop and external speaker outputs, plus a 12" Sheffield
loudspeaker in a sealed-back cabinet that offers
®
maximum resonance and sound projection.
Before you begin playing through your amplifier, it is very important to ensure that the product has the proper AC line voltage
supplied. You can find the proper voltage for your amp printed next to the IEC line (power) cord on the rear panel of the unit.
Each product feature is numbered. Refer to the front panel diagram in this manual to locate the particular features next to its
number.
Please read this guide carefully to ensure your personal safety as well as the safety of your amplifier.
FEATURES:
• 60 watts RMS
• 16, 8 or 4 ohms
• Five 12AX7 preamp tubes and two 6L6GC power-amp tubes
• Effects loop
• Separate three-band EQ on each channel
• Separate Resonance and Presence controls on each channel
• Separate pre/post gain on each channel
• Footswitchable Crunch boost on Rhythm channel
• Three-spring reverb
• MSDI
microphone-simulated XLR direct output
• 12" Sheffield
loudspeaker
®
• External speaker outputs

Publicité

loading