Sony SDM-N50R Mode D'emploi page 15

Resetting the adjustments (RESET)
This monitor has the following two reset methods. Use the
RESET menu to reset the adjustments.
1
Press the MENU button.
The main menu appears on the screen.
2
Press the M(+)/m(–) buttons to select 0
and press the OK button.
The RESET menu appears on the screen.
Reset the settings according to the following instructions.
Resetting the adjustment data most appropriately
for the current input signal
Press the M(+)/m(–) buttons to select SCREEN RESET
and press the OK button.
The automatic picture quality adjustment function of this monitor
automatically adjusts the picture position, phase, and pitch, to the
most appropriate value. If this function is activated, the phase is
automatically adjusted whenever the monitor receives the same
input signal.
The RESET menu is automatically returned to the main menu
after the adjustment data is reset.
Resetting all of the adjustment data for all input
signals
Press the M(+)/m(–) buttons to select ALL RESET and
press the OK button.
The RESET menu is automatically returned to the main menu
after the adjustment data is reset.
To cancel resetting
Press the M(+)/m(–) buttons to select
OK button.
The RESET menu returns to the main menu without resetting the
adjustment data.
Additional settings (Option)
You can adjust the following options:
• WIDE STEREO
• BASS BOOST
• BACKLIGHT
• LIGHT SENSOR
• POWER SAVE
0 0 (RESET) 0
• USER SENSOR
• LANGUAGE
• MENU LOCK
1
Press the MENU button.
The main menu appears on the screen.
2
Press the M(+)/m(–) buttons to select m.
The option menu appears on the screen.
3
Press the M(+)/m(–) buttons to select the desired
option item and press the OK button.
Adjust the selected option item according to the following
instructions.
Increasing the soundscape (wide stereo function)
This adjustment makes use of the DSP and creates the illusion of
the built-in stereo speaker being further away than it actually is,
thus enhancing sound presence.
First press the M(+)/m(–) buttons to select
STEREO) and press the OK button. Then press the
M(+)/m(–) buttons to select either 2, 1, or OFF.
The wide stereo function is used to increase the soundscape.
Selecting 1 or 2 increases incrementally the soundscape effect
toward the front of the monitor.
and press the
Notes
• If your connected computer or audio equipment uses special sound
functions, such as surround sound, be sure to turn these functions off.
If these functions are being used with the wide stereo function of this
monitor, the wide stereo function may not function properly and thus
not produce the desired sound effect.
• This function is automatically turned off when you use headphones.
However, in this case, the indication in the WIDE STEREO menu does
not change.
• The wide stereo function allows you to increase the soundscape by
converting the analog signals into digital. The sound may be distorted
depending on the input signal and music. In this case, decrease the
volume or set the wide stereo function to OFF.
Boosting the bass (bass boost function)
This option increases the bass output of the speaker.
First press the M(+)/m(–) buttons to select
BOOST) and press the OK button. Then press the
M(+)/m(–) buttons to select either ON or OFF.
GB
(WIDE
(BASS
(continued)
15