Eaton EX RT 7/11 Manuel D'installation Et D'utilisation page 32

3. Operation
3.6 Shut down
OFF
18
Page 30 - 34007558EN/AE
15
LOAD LEVEL
4 kW / 5 kVA
ON
12 9
1 - Press the OFF button 18
The load is no longer protected by the UPS.
It is powered via the bypass AC source. If the UPS is
set in frequency converter mode, the load will not be
powered. If the bypass AC source is out of tolerance,
the UPS will generate a 10 ms output calibrated break.
2 - Set the battery circuit breaker(s)
3 - Set the Normal AC source switch
4 - For a full shutdown of UPS and connected load, the
upstream circuit breaker (not included) should be set to the "0"
position.
more than 3 seconds.
12 to the "0" position.
to the "0" position.
9