Eaton EX RT 7/11 Manuel D'installation Et D'utilisation page 17

Rear bracket system (included with rail kits, part numbers 68001 and 68002)
Input/output junction box bracket system (included with power module rail kit,
part number 68001)
This bracket will maintain the Input/Output box at the rear of the rack enclosure when hot-swapping
the power module. It will then be easier to slide the replacement module into the connectors
of the Input/Output box.
1
2
2
2
4
4
3
To be used if you need to move
the rack enclosure with UPS already
rack-mounted inside.
1
2. Installation
1
3
34007558EN/AE - Page 15